Silicone-based primer for exterior and interior use, consoli-dating the substrate for following silicone-based coating. Odourless, with high penetration and high vapour diffusion. Easy to apply. Free of solvents and harmful emissions.
For exterior and interior use, on chalking, absorbent and sanding substrates.
Special silicone-resin dispersion
Brush. Do not apply on sun heated substrates, during strong winds, at high temperatures, extremely high humidity, in fog or rain. Consider the risk of night frost. If necessary, protect the façade with suitable scaffolding-nets or tarpaulins.
Needs to be clean, dry and free of loose particles. For underground treatment and application VOB, part C, DIN 18363 and the relevant BFS information must be observed.
Dilute Silikon-Grundfestiger with water and adjust viscosity to the substrate on-site. In order to find the right dilution, it might be helpful to try different dilutions on the wall. The primer must penetrate completely into the substrate. It may not stay on the surface, otherwise it interferes with the following paints.
Spreading rate per coating:
Approx. 150 - 200 ml/m² on smooth underground (if necessary test on the wall).
At least + 5°C (Degrees Celsius) for air and underground during application and drying.
The surface of the coating is dry and can be painted over after 8 - 10 hours (at a temperature of 20 °C and a relative atmospheric humidity of 65 %). High humidity, low temperatures and low air exchange extend the hardening and drying time.
In case of adverse weather conditions always take appropriate actions (e.g. rain protection) to protect work areas and freshly painted surfaces.
Cleaning of tools:
Clean with water immediately after use.
Cool, but not freezing.
Can be stored for at least 12 months after date of filling (see additional sticker) if stored properly in the unopened original packaging.
Art.No. and description:
40 40 001 JONAS Silikon-Grundfestiger
Special silicone-resin emulsion, water, additives.
Please follow the instructions of the safety data sheet
This product is not classified according to EU regulation No 1272/2008 [CLP].
EU-Limit for the product Kat. A/h: 30 g/l (2010). This product contains < 1 g/l VOC.
Empty containers can be disposed for recycling. Any dried residues of material can be disposed of as construction waste or together with domestic garbage. Containers with liquid material residues must be disposed of according to local regulations. For further information, please contact your local waste authority.
Advice acc. to CLP:
Keep out of reach of children. Wear appropriate respiratory protection (full mask / half mask equipped with filter type A2/P2). Avoid eating, drinking and smoking during use of the product. Ensure good ventilation during and after application. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not empty into drains or water courses. Safety data sheet available on request. Advice for people under phone-no.: 49(0)2058/789-0.