Interior paint with very good hiding power, a very high degree of whiteness and excellent application properties. Free of solvents and harmful emissions. Without the addition of preservatives.
DIN EN 13300
DIN EN 13300:
For interior use on good, solid new and old underground such as stucco, concrete, woodchip paper, gypsum board (without lignin marks).
Special resin dispersion
White / off-white
Content of Solids:
Approx. 60 %
Brush / roller / spray (airless).
Needs to be clean, dry, and solid. Otherwise use JONAS Hydro-Haft-& Tiefgrund first to consolidate the underground. For underground treatment and application VOB, part C, DIN 18363 and the relevant BFS information must be observed.
Priming coat: Dilute product with 5% water. Final coating: use product without dilution.
Spreading rate per coating:
Approx. 150 ml/m² on smooth underground (if necessary test on the wall).
At least + 5°C (Degrees Celsius) for air and underground during application and drying.
The surface of the coating is dry and can be painted over after 8 - 10 hours (at a temperature of
20 °C and a relative atmospheric humidity of 65 %). High humidity, low temperatures and low air exchange extend the hardening and drying time.
Product can be tinted with JONAS Allcolor Vollton- und Abtönfarben. Tinting may lead to deviations in the technical data, also with respect to contents of preservatives.
Colour accuracy: property conditions have an influence on colour accuracy and the uniformity of colour. The following conditions should be avoided:
a. Irregularly sucking substrate
b. Different surface humidity in the substrate
c. Patches with different alkalinity and / or ingredients from the substrate
Cleaning of tools:
Clean with water immediately after use.
Cool, but not freezing.
Can be stored for at least 12 months after date of filling (see additional sticker) if stored properly in the unopened original packaging.
Art.No. and description:
00 45 001 JONAS Malerweiß (white)
00 45 101 JONAS Malerweiß (off-white)
White: 12.5 l / 5 l / 2.5 l
Off-white: 12.5 l
Resin dispersion, white pigment, calcium carbonate, silicate, water, additives.
* o.K., i.e. we do not add any preservatives during production of this product.
Please follow the instructions of the safety data sheet
This product is not classified according to EU regulation No 1272/2008 [CLP].
EU-Limit for the product Kat. A/a: 30 g/l (2010). This product contains < 1 g/l VOC.
Empty containers can be disposed for recycling. Any dried residues of material can be disposed of as construction waste or together with domestic garbage. Containers with liquid material residues must be disposed of according to local regulations. For further information, please contact your local waste authority.
Advice acc. to CLP:
Keep out of reach of children. Wear protective goggles in case of danger. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Wear appropriate respiratory protection (full mask / half mask equipped with filter type A2/P2). Avoid eating, drinking and smoking during use of the product. Ensure good ventilation during and after application. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not empty into drains or water courses. Reduce waste of paint by estimating necessary quantity before. Keep surplus paint for later use. Further use of paint has a positive impact on the environmental effects of the product during its life cycle. Safety data sheet available on request.