Silicone-based brush-on plaster. Filling, with good hiding power. With water repellent properties. Priming coat for following applications with silicone paints or silicone stucco. Weatherproof. Free of solvents and harmful emissions. Free of solvents and harmful emissions.
For exterior and interior use on new and old solid undergrounds, such as stucco, brick-masonry, lime-sandstone. As priming coat for following applications with silicone-resin paints or silicone-resin stucco.
Special binder combination
Content of Solids:
Approx. 68 %
Brush / roller / spray (with special equipment). Do not apply on sun heated substrates, during strong winds, at high temperatures, extremely high humidity, in fog or rain. Consider the risk of night frost. If necessary, protect the façade with suitable scaffolding-nets or tarpaulins.
Needs to be clean, dry, and solid. Otherwise use JONAS Silikon-Grundfestiger first to consolidate the underground. For underground treatment and application VOB, part C, DIN 18363 and the relevant BFS information must be observed.
Dilute priming coat with 5% water.
Spreading rate per coating:
Approx. 300 – 350 g/m² on smooth underground (if necessary test on the wall).
At least + 5°C (Degrees Celsius) for air and underground during application and drying.
The surface of the coating is touch-dry after 24 hours. Final hardness after approx. 2 weeks (at a temperature of 20 °C and a relative atmospheric humidity of 65 %). High humidity, low temperatures and low air exchange extend the hardening and drying time.
In case of adverse weather conditions always take appropriate actions (e.g. rain protection) to protect work areas and freshly painted surfaces.
Product can be tinted with standard silicone tinting paint. Check compatibility on a case by case basis. Tinting may lead to deviations in the technical data, also with respect to contents of preservatives.
Colour stability: weather, humidity, UV-light and accumulations may have an influence on the coating surface. The process of change is dynamic and depends on climate and exposition conditions. The current national regulations, leaflets etc. apply.
Colour accuracy: weather conditions and property conditions have an influence on colour accuracy and the uniformity of colour. The following conditions should be avoided:
a. Irregularly sucking substrate
b. Different surface humidity in the substrate
c. Patches with different alkalinity and / or ingredients from the substrate
d. Direct sunlight with sharp shadows on the still humid coating
Washout of additives: For coatings which are not yet fully dried any water impact, i.e. dew, fog or rain, may washout additives from the coating which then build-up on the surface. The extent of this effect differs, depending on the intensity of the colour. This has no influence on the quality of the product. The effect will disappear under normal weather conditions.
Cleaning of tools:
Clean with water immediately after use.
Cool, but not freezing.
Can be stored for at least 12 months after date of filling (see additional sticker) if stored properly in the unopened original packaging.
Art.No. and description:
34 00 001 JONAS Silikon-Streichputz
Ingredients acc. to VdL RL01:
Resin dispersion, special silicone-resin emulsion, white pigment, calcium carbonate, water, additives, preservatives, BIT/MIT.
Please follow the instructions of the safety data sheet
This product is not classified according to EU regulation No 1272/2008 [CLP].
EU-Limit for the product Kat. A/a: 30 g/l (2010). This product contains < 1 g/l VOC.
According to EN 15824 for stucco with organic binder for interior use.
Declaration of performance no. 01-7
Flammability class B-s1, d0 (for use on mineral substrates.)
(The classification only applies if in practical use the construction product is used on base boards made of gypsum or base boards classified A1 or A2-s1, d0 according to DIN EN 13501-1 and with a gross density of 525 kg / m³).
Water absorption: no performance determined.
Water vapour permeability µ: no performance determined.
* Adhesive strength: > 0,3 MPa
Durability (frost resistance): no performance determined.
Thermal conductivity λ 10, dry, mat: no performance determined.
Empty containers can be disposed for recycling. Any dried residues of material can be disposed of as construction waste or together with domestic garbage. Containers with liquid material residues must be disposed of according to local regulations. For further information, please contact your local waste authority.
Advice acc. to CLP:
Keep out of reach of children. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Wear appropriate respiratory protection (full mask / half mask equipped with filter type A2/P2). Avoid eating, drinking and smoking during use of the product. Ensure good ventilation during and after application. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not empty into drains or water courses. Contains: 1,2-Benzisothiazol-3(2H)-on / 2-Methyl-2H-isothiazol-3-on. Safety data sheet available on request. Advice for people suffering from isothiazolinone allergy under phone-no.: +49(0)2058/789-0.